Purification of Pd Catalyst in Nitrogen Generator

Nitrogen generator is an advanced gas separation technology, which uses imported carbon molecular sieve (CMS) as adsorbent and uses pressure swing adsorption principle (PSA) at room temperature to separate air to produce high purity nitrogen.

Wuxi Zhongheng Gas Equipment Manufacturing Co., Ltd. is a specialized manufacturer of gas separation equipment. It has advanced technical advantages in the nitrogen machine industry. Because of its focus, it is professional. With advanced science and technology, high quality and efficient service, it enjoys a good reputation in the industry and high-tech entities in many fields.

Purification of Pd catalyst for oxygen removal from nitrogen generator:

A certain flow rate and purity of nitrogen and hydrogen enter the device at the same time. After fully mixing in the mixer, they enter the device equipped with palladium catalyst deaerator. Under the action of deoxidizing catalyst, the chemical reaction of 2H2+O2=2H2 is produced to achieve the purpose of deoxidization. After deoxidization, water in nitrogen is dehydrated by cooler, and then nitrogen continues to enter the dryer to dry, so that the dew point of nitrogen reaches - 60 C. Two dryers are equipped, one of which is for adsorption drying, the other is for regeneration of the dryer that has absorbed saturated water, in order to prepare for the next cycle of adsorption work. After drying, nitrogen is dedusted through filters, and the final product is high purity nitrogen.

Readers of this article also read: PSA nitrogen machine process overview, process characteristics of nitrogen machine